Coaxial HV Connectors

Coaxial HV Connectors

MHV High-Voltage Connector

Miniature coaxial high-voltage connectors are also known as MHV connectors. When mated, they have a test voltage of 5 kV rms and an operating voltage of up to 1.6 kV rms. They are also designed for applications up to 300 MHz.

MHV-connectors are based on the construction of BNC connectors, but they have protrusive insulators, what leads to a slight protection against contact of conductors under voltage in an uncoupled condition

For a maximum contact protection of uncoupled connectors, the connector series SHV is recommended.

Our complete MHV range is available via our online shop.

Vergleich MHV Stecker und Buchse
1: MHV jack; 2: MHV plug

SHV High-Voltage Connector

To ensure greater safety, we offer SHV high-voltage connectors (SHV = Safe High Voltage) in addition to MHV.
The inner conductor contacts are backspaced in order to exclude the contact of conductors under voltage when unconnected. When connecting, the outer contacts touch each other before the inner contacts.

SHV-Connectors are suitable for all applications up to 5 kV DC or 3.5 eff. These connectors are particularly used for nuclear devices as well as for testing and measuring devices.  All given values are valid in connected and disconnected condition

Our complete SHV range is available via our online shop.

Vergleich SHV Stecker und Buchse
1: SHV plug; 2: SHV jack

Pre-Assembled Cables

Do you need pre-assembled high-voltage cables with MHV or SHV connectors according to your individual specifications? In our online cable configurator, you can assemble your desired cable according to your requirements under the section “High-voltage cables”. Please note that our high-voltage connectors are also compatible with some regular 50 Ohm cables. Simply select the “Coaxial cable 50 Ohm” category.

Aircell 5 Heatex

Aircell 5 Heatex

The Aircell 5 Heatex cable is suitable for a frequency range up to 10 GHz. The RF conductor has a limited flexibility and is recommended for wireless communication applications. Unlike the Aircell 5, the Heatex has a halogen-free jacket. Moreover, this cable is certified for railroad applications according to the requirement sets R15 and R16 of the EN 45545-2 standard.

The good attenuation values are achieved by a low-loss PE dielectric medium with a gas content of more than 70%, as well as by the inner conductor and the double shielding from pure copper.

Areas of application: Communications and radio technology: low attenuation and interference-proof.

Aircell 5 Heatex: (Colour: black) 50 Ω; LowLoss
Temperature range from -40°C to +85°C

You can find the Aircell 5 Heatex in our shop:

DescriptionArticleData sheet
Aircell 5 Heatex (SSB)050317Data sheet (187KB)
Aircell 5 Heatex Koaxialkabel

Technical Data:

Aircell 5 Heatex (SSB) Coaxial cableMaterialDiameter
Inner conductorCopper solid1.13 mm
DielectricFoamed PE3.10 mm
Cable screenCopper foil , Copper braiding3.70 mm
Cable sheathFRNC / LSNH, black5.00 mm

Alternative Cable:

DescriptionArticleData sheetOnline shop
Aircell 5 (SSB)050116Data sheet (183KB)Online shop

Would you like the Aircell 5 Heatex pre-assembled with suitable connectors? No problem with our online cable configurator!

Suitable Connectors:

FME jack | BNC angle plug | BNC plug | BNC bulkhead jack | BNC angle plug | BNC jack | TNC angle plug | TNC plug | TNC Reverse plug | N plug | N bulkhead jack | N jack | N angle plug | N plug | UHF/PL259 plug | SMA jack | SMA plug | SMA plug | SMA angle plug | SMA Reverse angle plug | SMA Reverse jack | SMA Reverse plug | SMA Reverse angle plug

Aircell 7 Heatex

Aircell 7 Heatex

The Aircell 7 Heatex cable is suitable for a frequency range up to 6 GHz. The RF line is flexible and recommended for wireless communication applications. Unlike the Aircell 7, the Heatex has a halogen-free sheath.

The good attenuation values are achieved by a low-loss PE dielectric with an air content of more than 70%, as well as by the inner conductor and the double shielding from pure copper.

Areas of application: Communications and radio technology

Aircell 7 Heatex: (Colour: black) 50 Ω; LowLoss
Temperature range from -40°C to +80°C

You can find the Aircell 7 Heatex in our shop:

DescriptionArticleData sheet
Aircell 7 Heatex (SSB)050318Data sheet (201KB)
Aircell 7, Koaxialkabel

Technical Data:

Aircell 7 Heatex (SSB) Coaxial cableMaterialDiameter
Inner conductorCopper stranded wire1.90 mm
DielectricFoamed PE5.00 mm
Cable screenCopper foil , Copper braiding5.70 mm
Cable sheathFRNC / LSNH, black7.30 mm

Alternative Cable:

DescriptionArticleData sheetOnline shop
Aircell 7 (SSB)050117Data sheet (198KB)Online shop
arnoflex 7 UF050284Data sheet (78KB)Online shop

Would you like the Aircell 7 Heatex pre-assembled with suitable connectors? No problem with our online cable configurator!

Suitable Connectors:

BNC plug | BNC jack | TNC plug | N plug | N angle plug | N jack | UHF/PL259 plug | UHF/PL259 plug | SMA plug | SMA plug | SMA Reverse plug

Ecoflex 10 Plus Heatex

Ecoflex 10 Plus Heatex

The Ecoflex 10 Plus Heatex cable is suitable for a frequency range up to 8 GHz. The RF line is flexible and recommended for wireless communication applications. Unlike the Ecoflex 10 Plus, the Heatex has a halogen-free sheath. Moreover, this cable is certified for railroad applications according to the requirement sets R15 and R16 of the EN 45545-2 standard.

The good attenuation values ​​of the Ecoflex 10 Plus Heatex as a low-loss cable are due to a low-loss PE dielectric with more than 70% air content as well as the inner conductor and a double shielding made of pure copper.

Areas of application: Communications and radio technology

Ecoflex 10 Plus Heatex (Colour: black) 50 Ω;
Temperature range from -55°C to +85°C

You can find the Ecoflex 10 Plus Heatex in our shop:

DescriptionArticleData sheet
Ecoflex 10 Plus Heatex (SSB)050319Data sheet (126KB)
Ecoflex 10 Plus

Technical Data:

Ecoflex 10 Plus Heatex (SSB) Coaxial CableMaterialDiameter
Inner conductorAluminum strand, copper plated2.85 mm
DielectricFoamed PE7.20 mm
Cable screenCopper foil , Copper braiding7.90 mm
Cable sheathFRNC / LSNH, black10.20 mm

Alternative Cable:

DescriptionArticleData sheetOnline shop
Ecoflex 10 Plus (SSB)050189Data sheet (125KB)Online shop
Ecoflex 10 (SSB)050131Data sheet (128KB)Online shop

Would you like the Ecoflex 10 Plus Heatex pre-assembled with suitable connectors? No problem with our online cable configurator!

Suitable Connectors

BNC plug | BNC plug | BNC jack | TNC plug | TNC angle plug | TNC plug | TNC Reverse plug | 7-16 DIN plug | N jack | N angle plug | N jack | N angle plug | N jack | N plug | N plug | N jack | UHF/PL259 plug | SMA plug | SMA jack | SMA plug | SMA Reverse plug

arnoflex 0.8/3.6

arnoflex 0.8/3.6

Our own arnoflex brand, which we created in cooperation with a European cable manufacturer, offers our customers a low-cost alternative to well-known branded cables.

The arnoflex 0.8/3.6 is used in studio applications and the transmission of image information as well as analogue and digital signals such as SDI, SDV, SDTI and HDTV.

Complies with: CEI 20-11, CEI 20-22/II, CEI 20-35 I/II, IEC 60332 I/II/III

arnoflex 0.8/3.6: (Colour: blue) 75 Ω;
Temperature range from -25°C to +80°C

You can find the arnoflex 0.8/3.6 in our shop:

DiscriptionArticleData sheet
arnoflex 0.8/3.6050282Data sheet (153KB)

Would you like the arnoflex 0.8/3.6 pre-assembled with suitable connectors? No problem with our online cable configurator!

arnoflex 0.8/3.6 Koaxialkabel

Technical Data:

ARNOFLEX 0.8/3.6 COAXIAL CABLEMaterialDiameter
Inner conductorCopper solid0.80 mm
DielectricFoamed PE3.65 mm
Cable screenAluminium foil , Tinned copper braiding4.35 mm
Cable sheathPLSF, blue5.90 mm

Alternative Cables:

DescriptionArticleData sheetOnline shop
0.8/3.7 AF FRNC, DRAKA050212Data sheet (124KB)Online shop
0.6/3.7 PVC, DRAKA050215Data sheet (93KB)Online shop

Suitable Connectors:

F plug  |  BNC UHD plug  |  TNC plug  |  TNC jack  |  MHV plug

arnoflex 155 PE

arnoflex 155 PE

arnoflex 155 PE Koaxialkabel

The low loss cable arnoflex 155 PE is designed for a frequency range up to 3 GHz, flexible and recommended for applications in the radio range. Due to the PE sheath, it can be used outdoors.

Its low-loss PE dielectric and its double shield made of tinned copper and aluminum foil give the cable good attenuation values.

The arnoflex 155 PE is a cost-effective alternative to the H155PE.

arnoflex 155 PE (Colour: black) 50 Ω;
Temperature range from -40°C to +75°C

You can find the arnoflex 155 PE in our shop:

DescriptionArticleData sheet
arnoflex 155 PE050313Data sheet (81KB)

Would you like the arnoflex 155 PE pre-assembled with suitable connectors? No problem with our online cable configurator!

arnoflex 155 PE Koaxialkabel

Technical Data:

ARNOFLEX 155 PE COAXIAL CABLEMaterialDiameter
Inner conductorCopper stranded wire19 x 0.28 mm
DielectricFoamed PE3.80 mm
Cable screenAluminium foil , Tinned copper braiding4.30 mm
Cable sheathPE, black5.40 mm

Alternative Cable:

DescriptionArticleData sheetOnline shop
H155 PE (Belden)050322Data sheet (223KB)Online shop

Suitable connectors :

BNC angle plug | BNC plug | TNC angle plug | TNC plug | TNC plug | TNC Reverse plug | TNC Reverse jack | 7-16 DIN plug | N bulkhead jack | N jack | N plug | N plug | N angle plug | N plug | N angle plug | UHF/PL259 plug | FME plug | FME jack | FME plug | SMA plug | SMA jack | SMA plug | BNC plug | SMA plug | SMA plug | SMA angle plug | SMA angle plug | BNC jack | SMA Reverse plug | SMA bulkhead jack | SMA Reverse angle plug | SMA Reverse bulkhead jack | SMA Reverse jack | BNC bulkhead jack