LMR Variants from Times Microwave

LMR Variants from Times Microwave

Our product range includes both connectors and coaxial cables from Amphenol Times Microwave Systems. The high-quality LMR cables are particularly noteworthy. In our range you will find the LMR-100A, LMR-195, LMR-200, LMR-240, LMR-400 and LMR-600, some of which are also available in various designs, which we have summarized for you in the following overview.

Regular LMR Cables:

The standard LMR cables are suitable for a wide range of applications, for example for measurement technology, laboratory use, audio and radio applications, broadband communication and in the automotive sector. The cables can be used reliably at frequencies up to 6 GHz and, thanks to their PE outer sheath, both indoors and outdoors. In our online shop you will find numerous connectors that are compatible with the various LMR cables, but you can also get them pre-assembled according to your wishes using our online cable configurator.

Ultraflex (UF):

The Ultraflex version of the LMR cables is suitable for moving applications with smaller bending radii than regular cables thanks to its stranded inner conductor. They can also be used outdoors and have low-loss characteristics. Our product range includes the UF versions of the LMR-195, LMR-240 and LMR-400.

Fire resistant (FR):

The LMR-FR cables have a fire-resistant polyethylene sheath and comply with the MIL-C 17F standard. They are suitable for installation inside buildings. We stock the FR versions of the LMR-100A, LMR-195, LMR-240, LMR-400 and LMR-600.

Direct Burial (DB):

The waterproof LMR-DB variant has a UV-resistant outer jacket and a waterproof structure. Due to their high weather resistance, these cables are particularly suitable for outdoor use. We have the LMR-400-DB in our range.


Further manufacturers

Overview Manufacturer | arnotec | Articles by Huber & Suhner | LMR by Times Microwave – LMR100, LMR195, LMR240, LMR400 | Articles by Telegärtner | Belden | Kabel by Draka | Coaxial cables from Habia | Articles by Radiall | Articles by Rosenberger | RFS | Articles by Lapp | Plugs and cables from Lemo! | Articles by SSB | Messi & Paoloni – Koaxialkabel | Articles by Neutrik | Wide range of IMS products | Flexa protective metal conduit strip-wound

RG214 vs. arnoflex 214 LSNH

RG214 vs. arnoflex 214 LSNH

Since we always want to offer our customers only the best quality and at the same time affordable prices, we have launched our own brand arnoflex together with a European cable manufacturer.

Our arnoflex cables are a low-cost alternative to well-known branded cables, with equivalent and in some cases better mechanical and electrical properties.

The arnoflex 214 LSNH can be ordered by the meter or pre-assembled with connectors in our online shop.

The table below compares the values ​​of the RG214/U and arnoflex 214 LSNH cables.
What is particularly worth mentioning here is that the arnoflex 214 has better attenuation values, is suitable for lower temperatures and is halogen-free. In addition, the RG214/U is double shielded, whereas the arnoflex 214 is triple shielded.

Comparison of technical data

arnoflex 214 LSNH Koaxialkabel
arnoflex 214 LSNH
RG214/U (Bedea)

Electrical Properties

Article number050311050328
Cable screen typeTriple shieldedDouble shielded
Impedance50 Ohm50 Ohm
Frequencymax. 3 GHzmax. 3 GHz
Cable attenuation0.12 db (400 MHz)
0.2 db (1 GHz)
0.29 db (2 GHz)
0.13 db (400 MHz)
0.29 db (1 GHz)
0.42 db (2 GHz)

Mechanical Properties

Cable sheathØ 10.8 mmØ 10.8 mm
– MaterialFRNC / LSNHPVC
Shield 2Silvered copper braiding
Shield 1Aluminium foilSilvered copper braiding
DielectricØ 7.25 mmØ 7.24 mm
– MaterialPEPE
Inner conductorØ 2.25 mmØ 2.25 mm
– MaterialCopper stranded wire silver-platedCopper stranded wire silver-plated
Temperature-30°C min. / +70°C max.-20°C min. / +70°C max.
Bending radius54 mm (single)
108 mm (repeated)
50 mm (single)
100 mm (repeated)
Halogen-freeJaNein

Further Information

Data sheetData sheet (172KB)Data sheet (84KB)
Cable configuratorReady made!Ready made!

Suitable Connectors for the arnoflex 214 LSNH

BNC angle plug | BNC plug | BNC plug | 7-16 DIN angle plug | N bulkhead jack, 4-flange | N bulkhead jack | N plug | N jack | N angle plug | N jack | UHF/PL259 plug

Coaxial HV Connectors

Coaxial HV Connectors

MHV High-Voltage Connector

Miniature coaxial high-voltage connectors are also known as MHV connectors. When mated, they have a test voltage of 5 kV rms and an operating voltage of up to 1.6 kV rms. They are also designed for applications up to 300 MHz.

MHV-connectors are based on the construction of BNC connectors, but they have protrusive insulators, what leads to a slight protection against contact of conductors under voltage in an uncoupled condition

For a maximum contact protection of uncoupled connectors, the connector series SHV is recommended.

Our complete MHV range is available via our online shop.

Vergleich MHV Stecker und Buchse
1: MHV jack; 2: MHV plug

SHV High-Voltage Connector

To ensure greater safety, we offer SHV high-voltage connectors (SHV = Safe High Voltage) in addition to MHV.
The inner conductor contacts are backspaced in order to exclude the contact of conductors under voltage when unconnected. When connecting, the outer contacts touch each other before the inner contacts.

SHV-Connectors are suitable for all applications up to 5 kV DC or 3.5 eff. These connectors are particularly used for nuclear devices as well as for testing and measuring devices.  All given values are valid in connected and disconnected condition

Our complete SHV range is available via our online shop.

Vergleich SHV Stecker und Buchse
1: SHV plug; 2: SHV jack

Pre-Assembled Cables

Do you need pre-assembled high-voltage cables with MHV or SHV connectors according to your individual specifications? In our online cable configurator, you can assemble your desired cable according to your requirements under the section “High-voltage cables”. Please note that our high-voltage connectors are also compatible with some regular 50 Ohm cables. Simply select the “Coaxial cable 50 Ohm” category.

Aircell 5 Heatex

Aircell 5 Heatex

The Aircell 5 Heatex cable is suitable for a frequency range up to 10 GHz. The RF conductor has a limited flexibility and is recommended for wireless communication applications. Unlike the Aircell 5, the Heatex has a halogen-free jacket. Moreover, this cable is certified for railroad applications according to the requirement sets R15 and R16 of the EN 45545-2 standard.

The good attenuation values are achieved by a low-loss PE dielectric medium with a gas content of more than 70%, as well as by the inner conductor and the double shielding from pure copper.

Areas of application: Communications and radio technology: low attenuation and interference-proof.

Aircell 5 Heatex: (Colour: black) 50 Ω; LowLoss
Temperature range from -40°C to +85°C

You can find the Aircell 5 Heatex in our shop:

DescriptionArticleData sheet
Aircell 5 Heatex (SSB)050317Data sheet (187KB)
Aircell 5 Heatex Koaxialkabel

Technical Data:

Aircell 5 Heatex (SSB) Coaxial cableMaterialDiameter
Inner conductorCopper solid1.13 mm
DielectricFoamed PE3.10 mm
Cable screenCopper foil , Copper braiding3.70 mm
Cable sheathFRNC / LSNH, black5.00 mm

Alternative Cable:

DescriptionArticleData sheetOnline shop
Aircell 5 (SSB)050116Data sheet (183KB)Online shop

Would you like the Aircell 5 Heatex pre-assembled with suitable connectors? No problem with our online cable configurator!

Suitable Connectors:

FME jack | BNC angle plug | BNC plug | BNC bulkhead jack | BNC angle plug | BNC jack | TNC angle plug | TNC plug | TNC Reverse plug | N plug | N bulkhead jack | N jack | N angle plug | N plug | UHF/PL259 plug | SMA jack | SMA plug | SMA plug | SMA angle plug | SMA Reverse angle plug | SMA Reverse jack | SMA Reverse plug | SMA Reverse angle plug

Aircell 7 Heatex

Aircell 7 Heatex

The Aircell 7 Heatex cable is suitable for a frequency range up to 6 GHz. The RF line is flexible and recommended for wireless communication applications. Unlike the Aircell 7, the Heatex has a halogen-free sheath.

The good attenuation values are achieved by a low-loss PE dielectric with an air content of more than 70%, as well as by the inner conductor and the double shielding from pure copper.

Areas of application: Communications and radio technology

Aircell 7 Heatex: (Colour: black) 50 Ω; LowLoss
Temperature range from -40°C to +80°C

You can find the Aircell 7 Heatex in our shop:

DescriptionArticleData sheet
Aircell 7 Heatex (SSB)050318Data sheet (201KB)
Aircell 7, Koaxialkabel

Technical Data:

Aircell 7 Heatex (SSB) Coaxial cableMaterialDiameter
Inner conductorCopper stranded wire1.90 mm
DielectricFoamed PE5.00 mm
Cable screenCopper foil , Copper braiding5.70 mm
Cable sheathFRNC / LSNH, black7.30 mm

Alternative Cable:

DescriptionArticleData sheetOnline shop
Aircell 7 (SSB)050117Data sheet (198KB)Online shop
arnoflex 7 UF050284Data sheet (78KB)Online shop

Would you like the Aircell 7 Heatex pre-assembled with suitable connectors? No problem with our online cable configurator!

Suitable Connectors:

BNC plug | BNC jack | TNC plug | N plug | N angle plug | N jack | UHF/PL259 plug | UHF/PL259 plug | SMA plug | SMA plug | SMA Reverse plug