Corrugated Cable – Cellflex®

Wellmantelkabel Cellflex

Corrugated cables with low loss properties, such as the Cellflex® variants, are usually also referred to as semi-flexible cables. In addition to a strong electrical performance, they also have an extremely robust design, which makes them ideal for applications in radio systems. Due to their PE jacket, they can also be used outdoors, where they are used for mobile phone base stations, HD TV and mobile internet, among other things.

A side effect of the special design with corrugated shielding is that this type of cable is only suitable for fixed installation. An application with frequent movement frequency is not compatible with the high bending radius. However, the cables offer excellent technical values, low losses and a high shielding effect.

Structure of Corrugated Cables

Darstellung Aufbau Wellmantelkabel

1 = Inner conductor – completion as solid wire
2 = Dielectric / Insulation
3 = Corrugated tubing
4 = Outer sheath

The new arrival at koax24: Cellflex® corrugated cable

Seit kurzer Zeit führen wir zwei unterschiedliche  Cellflex® Wellmantelkabel in unserem Sortiment: das LCF12-50J sowie das LCF14-50J. Beide Kabel sind ab sofort als Meterware erhältlich. Benötigen Sie die Leitungen bereits mit den passenden Steckverbindern konfektioniert? Dann werfen Sie jetzt einen Blick in unseren Online-Kabelkonfigurator. Neben den Wellmantelkabeln finden Sie hier eine große Auswahl an Koaxialleitungen in 50 und 75 Ohm.
We have recently added two different Cellflex® corrugated cables to our range: the LCF12-50J and the LCF14-50J. Both cables are now available by the meter. Do you need the cables already assembled with the appropriate connectors? Then take a look at our online cable configurator. In addition to the corrugated cables, you will also find a large selection of coaxial cables in 50 and 75 Ohm.

If you have any additional requirements that go beyond our range, please do not hesitate to contact us.

LMR Variants from Times Microwave

LMR Variants from Times Microwave

Our product range includes both connectors and coaxial cables from Amphenol Times Microwave Systems. The high-quality LMR cables are particularly noteworthy. In our range you will find the LMR-100A, LMR-195, LMR-200, LMR-240, LMR-400 and LMR-600, some of which are also available in various designs, which we have summarized for you in the following overview.

Regular LMR Cables:

The standard LMR cables are suitable for a wide range of applications, for example for measurement technology, laboratory use, audio and radio applications, broadband communication and in the automotive sector. The cables can be used reliably at frequencies up to 6 GHz and, thanks to their PE outer sheath, both indoors and outdoors. In our online shop you will find numerous connectors that are compatible with the various LMR cables, but you can also get them pre-assembled according to your wishes using our online cable configurator.

Ultraflex (UF):

The Ultraflex version of the LMR cables is suitable for moving applications with smaller bending radii than regular cables thanks to its stranded inner conductor. They can also be used outdoors and have low-loss characteristics. Our product range includes the UF versions of the LMR-195, LMR-240 and LMR-400.

Fire resistant (FR):

The LMR-FR cables have a fire-resistant polyethylene sheath and comply with the MIL-C 17F standard. They are suitable for installation inside buildings. We stock the FR versions of the LMR-100A, LMR-195, LMR-240, LMR-400 and LMR-600.

Direct Burial (DB):

The waterproof LMR-DB variant has a UV-resistant outer jacket and a waterproof structure. Due to their high weather resistance, these cables are particularly suitable for outdoor use. We have the LMR-400-DB in our range.


Further manufacturers

Overview Manufacturer | arnotec | Articles by Huber & Suhner | LMR by Times Microwave – LMR100, LMR195, LMR240, LMR400 | Articles by Telegärtner | Belden | Kabel by Draka | Coaxial cables from Habia | Articles by Radiall | Articles by Rosenberger | RFS | Articles by Lapp | Plugs and cables from Lemo! | Articles by SSB | Messi & Paoloni – Koaxialkabel | Articles by Neutrik | Wide range of IMS products | Flexa protective metal conduit strip-wound

Aircell 5 Heatex

Aircell 5 Heatex

The Aircell 5 Heatex cable is suitable for a frequency range up to 10 GHz. The RF conductor has a limited flexibility and is recommended for wireless communication applications. Unlike the Aircell 5, the Heatex has a halogen-free jacket. Moreover, this cable is certified for railroad applications according to the requirement sets R15 and R16 of the EN 45545-2 standard.

The good attenuation values are achieved by a low-loss PE dielectric medium with a gas content of more than 70%, as well as by the inner conductor and the double shielding from pure copper.

Areas of application: Communications and radio technology: low attenuation and interference-proof.

Aircell 5 Heatex: (Colour: black) 50 Ω; LowLoss
Temperature range from -40°C to +85°C

You can find the Aircell 5 Heatex in our shop:

DescriptionArticleData sheet
Aircell 5 Heatex (SSB)050317Data sheet (187KB)
Aircell 5 Heatex Koaxialkabel

Technical Data:

Aircell 5 Heatex (SSB) Coaxial cableMaterialDiameter
Inner conductorCopper solid1.13 mm
DielectricFoamed PE3.10 mm
Cable screenCopper foil , Copper braiding3.70 mm
Cable sheathFRNC / LSNH, black5.00 mm

Alternative Cable:

DescriptionArticleData sheetOnline shop
Aircell 5 (SSB)050116Data sheet (183KB)Online shop

Would you like the Aircell 5 Heatex pre-assembled with suitable connectors? No problem with our online cable configurator!

Suitable Connectors:

FME jack | BNC angle plug | BNC plug | BNC bulkhead jack | BNC angle plug | BNC jack | TNC angle plug | TNC plug | TNC Reverse plug | N plug | N bulkhead jack | N jack | N angle plug | N plug | UHF/PL259 plug | SMA jack | SMA plug | SMA plug | SMA angle plug | SMA Reverse angle plug | SMA Reverse jack | SMA Reverse plug | SMA Reverse angle plug

Aircell 7 Heatex

Aircell 7 Heatex

The Aircell 7 Heatex cable is suitable for a frequency range up to 6 GHz. The RF line is flexible and recommended for wireless communication applications. Unlike the Aircell 7, the Heatex has a halogen-free sheath.

The good attenuation values are achieved by a low-loss PE dielectric with an air content of more than 70%, as well as by the inner conductor and the double shielding from pure copper.

Areas of application: Communications and radio technology

Aircell 7 Heatex: (Colour: black) 50 Ω; LowLoss
Temperature range from -40°C to +80°C

You can find the Aircell 7 Heatex in our shop:

DescriptionArticleData sheet
Aircell 7 Heatex (SSB)050318Data sheet (201KB)
Aircell 7, Koaxialkabel

Technical Data:

Aircell 7 Heatex (SSB) Coaxial cableMaterialDiameter
Inner conductorCopper stranded wire1.90 mm
DielectricFoamed PE5.00 mm
Cable screenCopper foil , Copper braiding5.70 mm
Cable sheathFRNC / LSNH, black7.30 mm

Alternative Cable:

DescriptionArticleData sheetOnline shop
Aircell 7 (SSB)050117Data sheet (198KB)Online shop
arnoflex 7 UF050284Data sheet (78KB)Online shop

Would you like the Aircell 7 Heatex pre-assembled with suitable connectors? No problem with our online cable configurator!

Suitable Connectors:

BNC plug | BNC jack | TNC plug | N plug | N angle plug | N jack | UHF/PL259 plug | UHF/PL259 plug | SMA plug | SMA plug | SMA Reverse plug

Ecoflex 10 Plus Heatex

Ecoflex 10 Plus Heatex

The Ecoflex 10 Plus Heatex cable is suitable for a frequency range up to 8 GHz. The RF line is flexible and recommended for wireless communication applications. Unlike the Ecoflex 10 Plus, the Heatex has a halogen-free sheath. Moreover, this cable is certified for railroad applications according to the requirement sets R15 and R16 of the EN 45545-2 standard.

The good attenuation values ​​of the Ecoflex 10 Plus Heatex as a low-loss cable are due to a low-loss PE dielectric with more than 70% air content as well as the inner conductor and a double shielding made of pure copper.

Areas of application: Communications and radio technology

Ecoflex 10 Plus Heatex (Colour: black) 50 Ω;
Temperature range from -55°C to +85°C

You can find the Ecoflex 10 Plus Heatex in our shop:

DescriptionArticleData sheet
Ecoflex 10 Plus Heatex (SSB)050319Data sheet (126KB)
Ecoflex 10 Plus

Technical Data:

Ecoflex 10 Plus Heatex (SSB) Coaxial CableMaterialDiameter
Inner conductorAluminum strand, copper plated2.85 mm
DielectricFoamed PE7.20 mm
Cable screenCopper foil , Copper braiding7.90 mm
Cable sheathFRNC / LSNH, black10.20 mm

Alternative Cable:

DescriptionArticleData sheetOnline shop
Ecoflex 10 Plus (SSB)050189Data sheet (125KB)Online shop
Ecoflex 10 (SSB)050131Data sheet (128KB)Online shop

Would you like the Ecoflex 10 Plus Heatex pre-assembled with suitable connectors? No problem with our online cable configurator!

Suitable Connectors

BNC plug | BNC plug | BNC jack | TNC plug | TNC angle plug | TNC plug | TNC Reverse plug | 7-16 DIN plug | N jack | N angle plug | N jack | N angle plug | N jack | N plug | N plug | N jack | UHF/PL259 plug | SMA plug | SMA jack | SMA plug | SMA Reverse plug