Skip to content Skip to main navigation Skip to footer

Coaxial Adapters

You can’t find the right type of connector for the type of cable that is essential for your application. Who hasn’t encountered this problem? You can easily overcome this challenge with our matching adapters. These help you to combine a wide variety of connector types so that you always have the right solution to hand.

Despite our high standards to provide all suitable connector types for every coaxial cable, it is unfortunately still possible that the availability of your desired connector on the market is limited. This is where our high-quality adapters from various manufacturers such as Telegärtner or

Cellflex LCF12-50J

LCF14-50J Cellflex® 1/4″

The LCF14-50J Cellflex® is a corrugated sheathed cable with LowLoss property of the category 1/4 inch / 50 Ohm also known as 1/4″ CELLFLEX® Superflexible Foam-Dielectric Coaxial Cable.

The LCF14-50J has a corrugated shield made of solid copper, a dielectric made of foam PE and an inner conductor made of copper-plated aluminum. The outer sheath, also made of PE, makes it ideal for outdoor applications.

Applications: Antennas, high stability connections to base stations, military equipment.

Cellflex LCF14-50J

LCF14-50J: sheath made of PE, sheath color black, 50 Ohm, RoHS compliant, UV resistant and suitable for outdoor use, temperature range -50°C …

Cellflex LCF12-50J

LCF12-50J Cellflex® 1/2″

The LCF12-50J Cellflex® is a corrugated sheathed cable with LowLoss property of the category 1/2 inch / 50 Ohm also known as 1/2″ CELLFLEX® Superflexible Foam-Dielectric Coaxial Cable.

The LCF12-50J has a corrugated shield made of solid copper, a dielectric made of foamed PE and an inner conductor made of copper-plated aluminum. The outer sheath, also made of PE, makes it ideal for outdoor applications.

Applications: Antennas, high stability connections to base stations, military equipment.

Cellflex LCF12-50J

LCF12-50J: sheath made of PE, sheath color black, 50 Ohm, RoHS compliant, UV resistant and suitable for outdoor use, temperature range …

Corrugated Cable – Cellflex®

Wellmantelkabel Cellflex

Corrugated cables with low loss properties, such as the Cellflex® variants, are usually also referred to as semi-flexible cables. In addition to a strong electrical performance, they also have an extremely robust design, which makes them ideal for applications in radio systems. Due to their PE jacket, they can also be used outdoors, where they are used for mobile phone base stations, HD TV and mobile internet, among other things.

A side effect of the special design with corrugated shielding is that this type of cable is only suitable for fixed installation. An application with frequent movement frequency is

Koaxialkabel, 214 LSNH

RG214 vs. arnoflex 214 LSNH

Since we always want to offer our customers only the best quality and at the same time affordable prices, we have launched our own brand arnoflex together with a European cable manufacturer.

Our arnoflex cables are a low-cost alternative to well-known branded cables, with equivalent and in some cases better mechanical and electrical properties.

The arnoflex 214 LSNH can be ordered by the meter or pre-assembled with connectors in our online shop.

The table below compares the values ​​of the RG214/U and arnoflex 214 LSNH cables.
What is particularly worth mentioning here is that the arnoflex 214 has better

SHV Verbinder

Coaxial HV Connectors

MHV High-Voltage Connector

Miniature coaxial high-voltage connectors are also known as MHV connectors. When mated, they have a test voltage of 5 kV rms and an operating voltage of up to 1.6 kV rms. They are also designed for applications up to 300 MHz.

MHV-connectors are based on the construction of BNC connectors, but they have protrusive insulators, what leads to a slight protection against contact of conductors under voltage in an uncoupled condition

For a maximum contact protection of uncoupled connectors, the connector series SHV is recommended.

Our complete MHV range is available via our online shop.

Koaxialkabel Aircell 5

Aircell 5 Heatex

The Aircell 5 Heatex cable is suitable for a frequency range up to 10 GHz. The RF conductor has a limited flexibility and is recommended for wireless communication applications. Unlike the Aircell 5, the Heatex has a halogen-free jacket. Moreover, this cable is certified for railroad applications according to the requirement sets R15 and R16 of the EN 45545-2 standard.

The good attenuation values are achieved by a low-loss PE dielectric medium with a gas content of more than 70%, as well as by the inner conductor and the double shielding from pure copper.

Areas of application: Communications and …

Koaxialkabel Aircell 7 Heatex

Aircell 7 Heatex

The Aircell 7 Heatex cable is suitable for a frequency range up to 6 GHz. The RF line is flexible and recommended for wireless communication applications. Unlike the Aircell 7, the Heatex has a halogen-free sheath.

The good attenuation values are achieved by a low-loss PE dielectric with an air content of more than 70%, as well as by the inner conductor and the double shielding from pure copper.

Areas of application: Communications and radio technology

Aircell 7 Heatex: (Colour: black) 50 Ω; LowLoss
Temperature range from -40°C to +80°C

You can find the Aircell 7 Heatex in our