FEP (Fluorinated Ethylene Propylene) Insulatoin material with exceptionally good electrical, thermal, chemical and mechanical properties. Permanent temperatures of up to 205°C and operating temperatures of up to -90°C are possible.
A cable whip is a certain type of cable adapter, consisting of a multi-pole connector, which transitions into several lines, each with a single connector. Mostly we offer these adapters in combination with our breakout boxes.
The feed of several participants is done via the connectors of the box and is led together to one connector (e.g. D-Sub), so that all signals are led via the cable whip to the corresponding end devices. This may be, for example, a measuring device.
Such an adapter can consist of 2-10 single cables, whereby the limitation mostly results from the diameter of the used cable type. 10 cables with a large diameter tend not to fit through the grommet of the D-Sub housing, so it would be advisable to use a thinner cable here.
The D-Sub connector is available as a standard version in DB9, DB15, DB25 and DB37. The cable length as well as the choice of connectors are entirely based on your application, so we can manufacture cable whips exactly to your requirements from as little as one piece.
D-Sub Kits
Do you need a D-Sub adapter to bundle your signals? No problem with our D-Sub kits!
These offer you all the individual components you need for a reliable measurement result: A D-Sub connector, a circuit board and a suitable housing with a shrink sleeve with internal adhesive for the cable outlet.
The circuit board solution is optimized for maximum distances between the individual contacts and guarantees consistent quality. This is also ensured by the high-quality connectors and housings.
Are you interested in a finished cable breakout with one of our D-Sub kits? These are available in your desired configuration starting from just one piece. Please feel free to contact us.
Cable assemblies in our Cable configurator:
Choose from over 500 different connecotrs as well as over 140 different types of cables to suit the combination you need. With our interactive cable configurator, you can easily assemble your individual cable using pictures and related information.
For flexible use on site, we reel your ordered coaxial cables for you on a cable drum from the manufacturer Schill. Your advantage: the cable is safely stored and mobile. Whether one or several cables, we take care of all the work involved, such as bundling several cables or integrating your desired connection into the cable drum.
Variants of pre-assembled cable drums:
With a single cable or as a multi-cable
With / without rubber handle
With plug connector integrated in the cable reel housing
Cable length up to 100m
To maximize safety, we recommend having the reels fitted with cover caps or protective caps. These protect your connectors from external influences like dust as long as they are not connected to your application. For convenient handling, the cover caps are also available with chains so that they do not get lost when not in use. Every cover cap in our range is waterproof to IP67 or IP54.
Can’t find the drum you want in our online shop? Don’t hesitate to contact us!
We would be happy to add the right cable drum for you to our range. All we need is the type of cable you require, the length of the assembly and the connectors required for your desired assembly. Using the manufacturer’s straightforward tool, we can narrow down the selection to a few drums that are guaranteed to be suitable for your cable.
Just let us know which of these drums you would like and we will send you an individual offer as soon as possible.
Your request (ideally with cable length and cable type)
You will receive a pre-selection of drums from us
You choose the appropriate one (ideally with article number or description)
Our offer
Cable assemblies in our Cable configurator:
Choose from over 500 different connecotrs as well as over 140 different types of cables to suit the combination you need. With our interactive cable configurator, you can easily assemble your individual cable using pictures and related information.
The promotion of the education sector is a special concern for arnotec GmbH. We have therefore decided to adapt our conditions for universities, colleges and similar institutions. We want to make our contribution to the next generation of researchers and scientific progress.
In addition to a payment term of 30 days net, also for new customers, we offer a special discount of 5% on our entire range of cable assemblies. The pre-assembled coaxial cables from koax24 and the stranded cables from litze24 impress with their high quality workmanship and only the best materials. Even deliveries at short notice can be reliably realized thanks to our numerous express options.
In addition to this discount, we offer special conditions for larger orders of 100 units or more and for tenders. Contact us for more information or for a customized offer.
You can’t find the right type of connector for the type of cable that is essential for your application. Who hasn’t encountered this problem? You can easily overcome this challenge with our matching adapters. These help you to combine a wide variety of connector types so that you always have the right solution to hand.
Despite our high standards to provide all suitable connector types for every coaxial cable, it is unfortunately still possible that the availability of your desired connector on the market is limited. This is where our high-quality adapters from various manufacturers such as Telegärtner or Rosenberger come into play. They create a transition between the connector you are looking for and any other connector, which we assemble to your desired cable instead.
If you are unable to find the right connector in our online cable configurator, our experts will of course be happy to provide you with support and help you to realize your requirements. Get in touch with us!
